Glass Curtain Wall & Facades
Glass facades that look sharp and keep the weather out.
Glass Curtain Wall & Facades in Dhaka
A curtain wall is the face of a building. It has to look clean from the street, carry wind load, keep water out and control heat. In Dhaka's climate, that last point matters as much as the first.
We work from your architectural drawings, coordinate with your structural engineer and install the system floor by floor, with every joint sealed and checked.
What we build
Types of glass curtain wall & facades
Stick-system curtain wall
Mullions and transoms built on site. Flexible and cost-effective for most buildings.
Unitized curtain wall
Factory-assembled panels for faster, cleaner installation on taller buildings.
Structural glazing
Silicone-bonded glass for a flush, frameless exterior.
Spider / point-fixed glazing
Glass held by stainless steel fittings for lobbies and atriums.
Storefront & showroom glazing
Large display glass with entrance doors built in.
Glass canopies & skylights
Daylight and weather cover for entrances, atriums and rooftops.
Options
Materials, glass and finishes
We help you choose based on location, use and budget, and bring samples to the site visit.
- Reflective, tinted and low-E glass for heat control
- Double glazed units (DGU) for heat and noise
- Tempered and laminated safety glass
- Aluminium mullion and transom systems
- Structural silicone and weather sealing
- Integrated openable vents and entrance doors
FAQ · Glass Curtain Wall & Facades
Common questions
What is the difference between stick and unitized curtain wall?
A stick system is assembled piece by piece on the building. A unitized system arrives as finished panels that are lifted into place. Stick suits most low and mid-rise projects; unitized saves time on site for larger or taller buildings.
Won't a glass facade make the building hot?
Not with the right glass. Reflective, low-E and double glazed units cut solar heat gain significantly while keeping the daylight. We help you pick the glass for your orientation and budget.
Can you work from our architect's drawings?
Yes. We review the drawings, prepare shop drawings for approval and coordinate with your architect and structural engineer before fabrication.
Related services
Often done together
Aluminium Windows & Doors
Sliding, casement and fixed windows. Balcony and entrance doors. Made to size, sealed tight.
Learn moreACP Cladding
Aluminium composite panel facades, shopfronts and column cladding with clean, flat lines.
Learn moreGlass Partitions & Office Glazing
Frameless and framed glass partitions, glass doors and meeting rooms for modern offices.
Learn morePlanning glass curtain wall & facades?
Tell us about the project. We'll visit, measure and send a clear, written quote.